4PCS Kitchen Under Cabinet RGB LED Puck Light Closet Shelf Counter Lamp w/Remote

Description

Similar Items
LED Wireless Puck Lights w/Remote Dimmable Touch Cupboard Wardrobe Closet 6 E
USD:22.96
6/12PCS Wireless StickOn LED Puck Night Lights Kitchen Closet Under Cabinet Lamp
USD:24.98
6Packs Puck Lights with Remote LED Color Changing Lights Under Cabinet Lighting
USD:21.86
6pc Wireless LED Puck Light Closet Under Cabinet Lighting Room Night Lamp Remote
USD:23.86
SOLMORE 6X Wireless LED Puck Lights Dimmable RDB LED Night Lamps Cabinet Closet
USD:16.94
6 PCS Wireless LED Puck Lights Under Cabinet Counter Closet Lighting W/ Remote
USD:13.99
3/6PCS LED Puck Light Wireless Under Cabinet Lighting Kit Kitchen Counter Lights
USD:19.08
Description
Product parameters
Voltage: 3.7V
Power: 0.3W
Maximum Lumen: 30LM
Warm light color temperature: 4000K
Lamp bead model: SMD 2835/5050
Number of lamp beads: 3+3, a total of 6 lamp beads
Shell material: ABS + PC
Power supply: Micro USB
Control mode: product lampshade control + infrared remote control
Remote control distance: within 5 meters (for Micro USB)
Lithium battery content: 1000MA
Life time: 100% brightness, can be lit for 12 to 14 hours. 50% initial brightness, can be bright for about 25 hours
Charging time: 2H
Color independent 16 colors
Timing: 3 types, 30 minutes, 60 minutes, 120 minutes
Explanation
1. This product has no memory function, and it will be restored to the factory settings every time it is turned off and then turned on again.
2. Press the lampshade above the lamp body, first the first button is warm light, the second button is red light, the third button is green light, the fourth button is blue light, and the fifth button is dynamic mode 1 (slow transition mode) ), the 6th button is dynamic mode 2 (fast jump mode), the 7th button is dynamic mode 3 (non-polar mode), and the 8th button is off.
3. Press and hold the mirror of the lamp body to adjust the brightness (Note: Mode 3 can not adjust the brightness)
4. You can use the remote control to control 16 kinds of colors you want to use constantly.
5. You can set the timer function to turn off the light. Use the time button on the remote control to adjust the time. First, the timing time is 30 minutes, 60 minutes, 120 minutes, the light flashes for entering the timing. Timing function can be used in static mode and dynamic mode.
6. This product uses Micro USB for charging, the red light is the charging state, and the green light is the full state.
7: The remote control is equipped with a battery insulation sheet. Please unplug the insulation sheet before use.
8: Wear an independent switch at the bottom. Please turn off the switch if you are not using it for a long time to prevent power consumption.
Installation
1. We provide double-sided tape for each lamp. All you need to do is stick one side of the tape to the rotating cover at the bottom of the lamp, and then stick the other side to the surface you want to stick. (Includes adhesive)
2. Before pasting, clean the pasting position and the bottom cover of the surface light with a cleaning cloth to maximize the viscosity.
3. There are 2 screw holes in the rotating cover at the bottom of the lamp body, which can be fixed with screws. (Screw not included)
4. If the battery is exhausted, turn the top of the lamp counterclockwise to remove it, and then replace it when fully charged to use.
Note
1. When closing the bottom cover, stick it to the location pasting point;
2. Do not soak in water and disassemble at will;
3. CR2025 button battery is included in the remote control. During the transportation, we added a transparent PVC insulation board between the batteries. When you use the remote control for the first time, you need to pull out the insulation sheet to use it.
5. The distance of the remote control depends on the power and direction. The light receivers are on the left and right sides of the Micro USB. The remote control needs to be aligned to be flexibly controlled. If the power is sufficient, you can control it at 5 meters. If the remote control does not work properly, remove the lamp body to charge it.
Product List:
Cabinet light X4
Remote control X 1
USB cable X 1
Adhesive X 4
Manual X 1
#divSKUDetail2
Detail Image
Payment
1.We accept Payoneer、PayPal、Mastercard、VISA、Google Pay 、American Express etc.
2.All major credit cards are accepted through secure payment processor.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or payment address. Please make sure your eBay and payment address is correct before you pay.
Shipping
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;