-40%

Dell PowerVault MD1220 24 X 1.2TB 10K SAS Dual EMM Dual Power Supplies

$ 1583.99

Availability: 41 in stock
  • MPN: md1220
  • Model: md1220
  • Form Factor: Rack-Mountable
  • Brand: Dell
  • Network Type: mini-SAS HD
  • Interface: SAS
  • Number of Drive Bays: 24
  • Condition: Used
  • Type: Direct Attach Storage

    Description

    Excellent working and cosmetic condition.  Dell PowerVault MD1220 24 X 1.2TB 10K SAS Dual EMM Dual Power Supplies.  Includes Dell Rapid Rails.  No Bezel.
    Dell™ PowerVault™ MD1220
    PERC H800
    PCI-E 2.0 Host-RAID adapter with two external x4 SAS ports, standard 512MB cache and TBBU (transportable battery-backup unit)
    Drives and Capacity
    Drives
    Up to twenty-four (24) 2.5-inch hot-pluggable SAS Hard Disk Drives
    Drive Performance and Capacities
    ·
    2.5” SAS HDDs - 10,000 RPM 6Gb/s SAS drives
    Maximum Capacity (per enclosure)
    12TB using twenty-four (24) 500GB 7200 RPM 6Gb/s SAS HDDs
    Expansion Capabilities
    PERC H800 enables expansion to 8 enclosures, 4 per port
    Host Connectivity
    Unified Mode
    ·
    Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)
    ·
    Unified mode (recommended redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)
    Split-Mode/Dual-Host Access
    Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 though 11 and a separate connectivity to drives 12 through 23
    Enclosure Management Modules and RAID levels
    Enclosure Management Modules (EMM)
    2 EMM provide redundant enclosure management capability
    RAID Levels
    0, 1, 5, 6, 10, 50 and 60
    Back-Panel Connectors (per EMM)
    Host Connectivity
    1 SAS (SFF 8088) IN connector for connection to the host
    Expansion Connectivity
    1 SAS (SFF 8088) OUT connector for expansion to an additional enclosure
    Service Management
    1 6-pin UART mini-DIN connector (for factory use only)
    Power Supplies (per PSU)
    Wattage
    600 W
    Host Heat Dissipation
    188 W
    Input Voltage Range
    100-240 VAC, auto-sensing
    Frequency Range
    50/60 Hz
    Amperage
    8.6 A at 100 V, 4.3 A at 240 V
    Available Hard Drive Power (per slot)
    Supported Continuous Consumption
    ·
    up to 1.2 A at +5V
    ·
    up to 0.5 A at +12V
    Physical
    Height x Width x Depth
    8.7cm (3.39 inches) x 48.2cm (18.8 inches) x 54.1cm (29.1 inches)
    Weight
    ·
    23.31 kg (51 lb) (maximum configuration)
    ·
    8.61 kg (19 lb) (empty)
    Weight:
    80 lb
    If you have any questions, please do not hesitate to contact me.
    Thank you.