-40%
European Design Transparent Standard 10 inch Water Filter Housing, 3/4” Port
$ 12.66
- Description
- Size Guide
Description
<European Design Transparent Standard 10 inch Water Filter Housing, Presser Relief Button, 3/4” Inlet/Outlet Brass Port, Mounting Hardware Included, Accepts Standard 10”x 2.5” Cartridges
Made by:
Unit Price:
.99
Product Description:
10" Transparent Standard Housing for Whole House Water Filtration System with 3/4" Inlet / Outlet Brass Ports (RA2-127-10)
- is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap and ring are made of high-flow polypropylene for toughness. The blue cap has 3/4" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.
Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation.
💎 DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes
💎 POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Removing Chlorine, Taste, Odors & Other Particles
💎 EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed
💎ACCEPTS 10” Standard Cartridges: Dupont PFC5002, WFPFC5002, Pentek DGD Series, 3M CFS110, CBC-10, Aqua Pure AP110, AP51T, Hydronix SGC-25-1005, Culligan P5, D-10A, OmniFilter RS14-SD, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, WHA2BF5, American Plumber W5P, Watts Premier MAXETW-975, WCBCS975-RV, SCWH-5, Tier1 EP5_10, EcoPure EPW2C, Purenex C-5M, KleenWater KWGE25RG, Omnipure OMB934-5M, WFPFC9001, MatriKX E32-250-125-975, DEV9108-15, iSpring FC15 (Sold Separately)
💎 WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Pentek 158643 3/8, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34,
Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs.
Those Housings Can Be Used With Following 10” X 2.5” Filter Cartridges (Sold Separately):
•
Sediment Water Filter Cartridge
•Pleated Washable Sediment Water Filter Cartridge
•
Block Activated Carbon Water Filter Cartridge
•
Granular Activated Carbon Water Filter Cartridge
•Special Water Filter Cartridge
Product Features:
•10” Transparent Housings
•3/4” Inlet / Outlet Brass Ports
•Pressure Relief Button
•Initial Pressure Drop: 1 PSI
•Maximum Operating Pressure: 60 PSI
•Operating Temperature: 39°F~125°F (4°C~52°C)
•Wall Mounting Bracket
•Housing Wrench
•Set of Screws
What you get in this Set:
Clear Housing
Housing Wrench
Bracket
Set of Screws